Ji daɗin duk tarin Cikakkun kayan dafa abinci da kayan dafa abinci.
Harshe
Ji daɗin duk tarin Cikakkun kayan dafa abinci da kayan dafa abinci.
Author: Infull Cutlery -China
Da aka fi amfani raw kayan for tableware ne 13/0 (410), 18/0 (430), 18/8 da kuma 18/10 (304). Bugu da kari, akwai mutane da yawa da sauran kayan da daban-daban amfani da farashin. Alal misali, 420 (tare da carbon) ne kawai dace da wukake, yayin da 201 ne domin maye gurbin 304, amma shi ne yiwuwa ga tsatsa.
Tun da sun kasance su biyu ba Magnetic, babu wani bambanci a surface gama. The 201 ne mafi arha samfurin tare da mafi ƙasƙanci price, amma 201 ne mafi yiwuwa ga matsalolin da tsatsa. 316 ne yafi da albarkatun kasa na wukar yin aikin tiyata.
Da ainihin aiwatar da yin bakin karfe tableware bukatar 50-60 matakai, amma shi za a iya raba da wadannan babban Categories. Bari mu bayyana samar da tsari na bakin karfe tableware.
1. albarkatun kasa sabon: (nufin samar da albarkatun kasa da ake ƙulli, kuma a yanka a cikin kayyade masu girma dabam da wata na'ura ta mutu)
2. Rolling: (nufin kayayyakin birgima ta na'ura fadada fadi da tsawon na samarwa) Bayan na farko mataki, da kayan zama da girman tableware, amma da kauri ba ya canja.
A cutlery a halin yanzu sayar ne duk lokacin farin ciki da bakin ciki, da cewa shi ne, da kauri da kai, kuma rike da cutlery ne daban-daban. Yawancin lokaci, da kauri daga cikin shugaban ne 0.8-2.0MM, wanda shi ne kasa da kauri daga cikin makama. Saboda haka, a karo na biyu aiwatar ake bukata.
3. trimming: (nufin yin amfani da wata na'ura da za Punch da samfurin a cikin wani kayyade siffar) Bayan na mirgina, da asali siffar da tableware za a bayyana.
4. Make da juna: (Magana game da samfurin cewa yana amfani da na'ura don extrude kayyade juna ta hanyar da ya mutu) Bayan trimming, za ka iya rarrabe tsakanin wuka, a cokali, kuma cokali mai yatsa. Amma yana da har yanzu a blank siffar da kuma rike da wani abin kwaikwaya siffar.
5. Edging: (yana nufin da samfurin cewa polishes dukan gefe na tableware da polishing na'ura da kuma polishing abu)
6. kafa: (nufin samar da kayayyakin da wani ajali siffar extruded ta da wata na'ura ta mutu) Bayan polishing gefuna, da wuka za a iya kai tsaye fallasa kawai ta bude hakora, amma da cokali da cokali mai yatsu ne bai isa ba, da kuma cokali bukatar a matse da wani mold to latsa cokali kai. Don samar da kwano siffar da kuma sauran kwana, da cokali mai yatsu ila yau yana bukatar wani ya mutu to extrude da sauran kwana. Saboda haka, wannan tsari shine ake kira.
Gyare-gyaren da aka alaka da overall bayyanar samfurin.
7. polishing: (yana nufin da polishing, na] aukacin surface da kayayyakin da polishing kayayyakin da aka yi da polishing inji)
Bayan duk na sama matakai, da tableware yana da wani haske a wannan lokaci, don haka a karshe polishing aiwatar ake bukata.
The sama na iya bayyana samar da tsari na bakin karfe tableware.
Kamar yadda ba za ka iya kwatanta, kowane irin bakin karfe cutlery muke yawan amfani da ita ba sa samuwa. Yana iya kawai za a samar bayan maimaita polishing. Shi ne ba kawai da kayan kudin, amma kuma da aiki cost.
A ƙãre samfurin aiki.
Tuntube Mu
+86 188 1922 0665
Unit A, daki 2308, No.1, Longkou West Road, Tianhe gundumar Guangzhou, SinMu Cigaba da Tuntubarmu
;
Haƙƙin mallaka © 2022 GuangDong Infull Cutlery Co., Ltd - www.infullcutlery.com Duk haƙƙin mallaka.
